HEATSTRIP® Intense White Outdoor Electric Radiant Heater
The new HEATSTRIP® Intense wall/ceiling mounted electric infra-red heater is a modern and attractive outdoor heating solution. With a carbon filament element infra-red heating element this slimline heater provides high-performance instant heat. The high-temperature output of the HEATSTRIP® Intense is perfect for exposed outdoor sites, high ceilings and hard to heat indoor and outdoor applications. With black and white models available, this heater can blend into a white ceiling, or be a feature to any outdoor area.
- Ideal for undercover protected and semi-exposed outdoor locations
- Easy DIY installation for 2200W unit, 3200W heater must be installed by a licensed electrician
- High quality construction with a new hexagonal grille
- Carbon filament infra-red heating element provides high performance instant heat
- 2 year residential and 1 year commercial warranty
- Minimum mounting height (including flush mount) 2.1m
- Ideal mounting height (including flush mount) 2.2m – 2.5m
- Maximum mounting height (including flush mount) 2.8
The mounting height of the electric heater can have a significant impact on performance. For mounting heights higher than the ideal range, we recommend the use of wires/chains or optional extension poles to reduce the height and ensure the heater is within the ideal range. Heater performance may be affected if outside this range.
In most outdoor or difficult-to-heat indoor applications, there are 2 methods when looking at the size and quantity of heaters required.
Option 1 is to comfort heat the entire area based on the total dimensions of the space, regardless of whether the entire area is being fully occupied or not.
Option 2 is to spot heat the high use areas, such as over outdoor tables, BBQ’s, lounges, assembly lines or indoor work-stations.
Often it is more practical and efficient to spot heat these areas. Spot heating will help to reduce the initial capital cost, as well as the on-going running costs. Spot heating will allow the area to be “zoned”, meaning heating only the areas that are being used, such as tables in a restaurant or outdoor alfresco area.
The top diagram shows how HEATSTRIP® Intense is recommended to be used directly over a table, while the bottom diagram indicates how to spot heat a large area.
NEW “off-white” colour to easily blend with a white ceiling
High quality construction with a hexagonal grille and instantaneous carbon element
Ideal for under covered protected and semi exposed outdoor locations
Construction materials: anodised alloy casing and end caps with powder coated hexagon grille with IPX5 protection from water ingress from all directions.
|MODEL||INDOOR PROTECTED||OUTDOOR ENCLOSED||OUTDOOR EXPOSED|
|THY2200W||14 m²||9 m²||5 m²|
|THY3200W||21 m²||13 m²||8 m²|
|THY2200W||2200||9.2||1068 x 120 x 90||6||1000||Yes|
|THY3200W||3200||13||1270x 120 x 90||7||1000||No|
*Running costs based on $0.25/kwH. Product is suitable for connection to a standard 240V/10amp GPO.
Optional Controllers (not included): Ideal to complement all HEATSTRIP® electric heaters, to provide flexibility & ease of use and reduce operating costs.
(Flush Mount for THY2200W)
(Flush Mount for THY3200W)
Set of 300mm off-white
Set of 600mm off-white
Set of 900mm off-white
Set of 1200mm off-white